Bookcase Wallbed Setup
Introduction
Unboxing the wallbed components.
Please use the arrows at the bottom of the player to move on and return to the previous video
Step 1
Installing the Sideboards
Step 2
Installing the Bridge Board
Step 3
Installing the Bridge Components.
Step 4
Installing the back stretcher board
Step 5
Installation of the Headboard
Step 6
Install of the Bed Lights
Step 7
Install of the Headboard Handles
Step 8
Installing the Lower Pivot Hardware
Step 9
How to attach to the wall
Step 10
Yoke Assembly
Step 11
Frame Assembly
Step 12
Wall Mount Adjustment
Step 13
Installing Springs
Step 14
Installing the Front Stretcher Board
Step 15
Installing the Legs
Step 16
Installing the Actuators
Step 17
Installing the Leg Cross Bar
Step 18
Installing the Headboard support
Step 19
Installing lights continued
Step 20
Installing the remaining slats
Step 21
Installing the Bookcases
Step 22
Adjusting the unit
Step 23
Installing the Fascia
Step 24
Shelf Retainers
Step 25
Install the Mattress
Un-Install
Instructions on how to un-install Wilding Wallbed’s Bookcase Wallbed
Minor product updates may have occurred since the filming of this video.
Please refer to the written instructions for the most up to date information.
Need Help During the Installation Process?
Tools Needed
Phillips Screw Driver | Ratchet | 8mm Allen Wrench | Stud Finder |
Regular Screw Driver | 1/2″ Socket | Vise Grips | Rubber Mallet |
Power Screw Driver | 10mm Socket | Pliers | Phillips Bit |
1/2″ Open End Wrench | 6′ Step ladder |
Need Help During Installation?
Customer Service Hotline: 1-866-725-6401
Monday – Thursday: 8am – 5pm
Friday: 8am – 3:30pm MST
Request a Call Back
If you are in need of assistance outside of normal business hours we’ll make every effort to contact you as soon as possible.